Electronic MOP Module MOP250-000 Specifications
General Description • Standard Features • Specifications • Dimensions • Connections
Specifications
- D.C. Power Input
- 24 VDC ±10%, 60mA max, internally fused
- +10VDC Reference Output
- External Ref Voltage Input
- Range: 0-10VDC
- Input Impedance: 1012 Ω
- Potentiometers
- Turns: 15
- Accel Range: 0 to 60s
- Decel Range: 0 to 60s
- Bias Range: 0 to 2.5V or 5mA
- Gain Range: 0 to 10V or 20mA
|
|
- Signal Output
- Voltage Output
- Selected by position V on J2. This circuit allows the output to source a voltage level of up to +10 VDC into a minimum resistance of 600 Ohms. If resistance is too low, output linearity may be affected.
- Current Output
- Selected by position I on J2. This circuit allows the output to source a regulated current up to 20mA into a maximum resistance of 500 Ohms. Using the BIAS pot, the output can source a 4 to 20mA signal.
- Temperature Range
|
Instruction Manual
Brochure
General Description • Standard Features • Specifications • Dimensions • Connections
Back to System Interface Components • Back to Product Line
Electronic MOP Module (Motorized Potentiometer)
MOP250-000
