KBPB Series Cycler General Description
May 3, 2012KBRC Series Standard Features
May 3, 2012KBRC Series DC Drives by KB Electronics
General Description• Standard Features • Specifications
Specifications
| PARAMETER | SPECIFICATION | FACTORY SETTING |
| AC Line Input Voltage (Volts AC, ±10%, 50/60 Hz) | 115 and 208/230 | 230 |
| Armature Voltage Range at 115 Volts AC Line (Volts DC) | 0 – ±90 | ____ |
| Armature Voltage Range at 208/230 Volts AC Line (Volts DC) | 0 – ±902, 0 – ±180 | 0 – ±180 |
| Field Voltage at 115 Volts AC Line (Volts DC) | 100/50 | ____ |
| Field Voltage at 208/230 Volts AC Line (Volts DC) | 200/100 | ____ |
| Signal Following Input (Non-Isolated3) Range (Volts DC) | 0 – ±10, 0 – ±15 | 0 – ±15 |
| Signal Following Linearity (% Base Speed) | 1 | ____ |
| Line Regulation (% Base Speed) | ±0.5 | ____ |
| Armature Feedback Load Regulation (% Base Speed) | ±1 | ____ |
| Tach-Generator Feedback Load Regulation (% Set Speed) | ±1 | ____ |
| Maximum Load Capacity (% for 2 Minutes) | 150 | ____ |
| Current Ranges (Amps DC) | 1.7, 2.5, 5, 7.5, 10 | 10 |
| Speed Range (Ratio) | 50:1 | ____ |
| Operating Temperature Range (°C) | 0 – 45 | ____ |
| Offset Trimpot (OFFSET) Range (% Base Speed) | 0 – ±10 | 0 |
| Reverse Acceleration Trimpot (RACC) Range (Seconds) | 0.2 – 15 | 1 |
| Forward Acceleration Trimpot (FACC) Range (Seconds) | 0.2 – 15 | 1 |
| Maximum Speed Trimpot (MAX) Range (% Base Speed) | 70 – 110 | 100 |
| Forward Current Limit Trimpot (FWDCL) Range (% Range Setting) | 0 – 200 | 150 |
| Reverse Current Limit Trimpot (REVCL) Range (% Range Setting) | 0-200 | 150 |
| IR Compensation Trimpot (IR) Range at 90 Volts DC Output (Volts DC at Full Load) | 0 – 15 | ____ |
| IR Compensation Trimpot (IR) Range at 180 Volts DC Output (Volts DC at Full Load) | 0-30 | 10 |
| Deadband Trimpot (DB) Range (% Base Speed) | 0 – ±3 | 0.5 |
| Timed Current Limit Trimpot (TCL) Range (Seconds) | 0 – 15 | 5 |
| AC Line Input Voltage ±10%, 50/60 Hz (Single Phase Volts AC) |
Maximum AC Line Input Current (Amps AC) |
Nominal Output Voltage (Volts DC) |
Maximum Output Load Current (Amps DC) |
Maximum Horsepower Rating HP, (KW) |
| 115 | 15 | 0 – ±90 | 11 | 1, (0.75) |
| 208/230 | 15 | 0 – ±180 | 11 | 2, (1.5) |
| 208/230 | 15 | 0 – ±902 | 11 | 1, (0.75) |
Notes:
1. KB Part No. 8841 is white FDA approved finish.
2. Step-down operation: Motor may have reduced brush life. Consult motor manufacturer.
3. Requires an isolated signal. If a non-isolated signal is used, install the Signal Isolator SIRC (P/N 8842).
VIEW INSTRUCTION MANUAL
View Data Sheet
For more information about this product,
call 1-888-286-8614 or e-mail us today!
General Description• Standard Features • Specifications
Back to DC Drives• Back to Product Line