O.E.M. D10425-000 / 200
DC Motor Controls
General Description • Standard Features • Specifications • Model Ratings/Dimensions • Connections
Standard Features
D10425-000/200
1/8 – 2 HP REGENERATIVE
- Operation from 115 or 230 VAC input for 90 or 180 VDC motor armatures.
- Switch selectable armature voltage or tachometer feedback.
- 7 or 50 VDC per thousand RPM feedback tachometer input.
- Independently adjustable Forward and Reverse Acceleration settings. Two time ranges are available for the Forward and Reverse Acceleration adjustments selectable by programing jumper.
- Single contact stopping by any of three methods:
- Coast to stop
- Controlled deceleration to stop
- Rapid stop (in current limit).
- A Summing Input connected directly to the input of the velocity loop which will accept an Isolated Input signal not to exceed ±10 VDC.
|
|
- A hard firing, high frequency multipulse gating circuit.
- I.C. regulated power supplies, metal film resistors and cermet potentiometers for stable operation under varying conditions of temperature and line voltage.
- On board A.C. line fuses.
- Oversized power handling components.
- Line transient suppression by MOV and RC snubber.
- Inner current loop type control circuit for fast and stable response under varying load conditions.
- Right Angle type mounting to minimize required chassis area.
- Speed/torque mode.
|
VIEW INSTRUCTION MANUAL
View Brochure
General Description • Standard Features • Specifications • Model Ratings/Dimensions • Connections
Back to DC Drives • Back to Product Line
O.E.M. D10425-000 / 200
DC Motor Controls
