Washdown Duty Non-Contact Sensor
Models WDDC1-XXX; WDDC2-XXX; WDDV1-XXX; & WDDV2-XXX

Sensor
Resolution: Infinite
Rotation: Mechanical; Continuous
Electrical: 310º +/-1%
Linearity tolerance: +/-0.9%
Power Rating: <1W@30VDC input
Temperature Range: 0 – +60°C

Connections made by NEMA 4X rated connector & shielded cable (included).

Power supply inputs have reverse polarity protection and output is short circuit protected to common.

Limit Switches (WDDC2-XXX and WDDV2-XXX only)
Ampere rating: 5 Amps
Voltage rating: 250 VAC

Connections made by a 2nd NEMA 4X rated
connector & cable (included).

Enclosure
Construction: 16 ga. Stainless Steel
Finish: Mill finish gray
Industry standard: NEMA 4X
Overall Size: Box-W=4.25”; L=7.25”; H=4.4”
With Mounting Feet: L=8.39”
Mounting Hole Pattern: 2” x 7.64
Mounting Hole diameter: 0.31”

Sensor Shaft
Construction: Stainless Steel
Diameter: ½-inch with flat

Mechanical Characteristics
Mechanical Angle: Continuous
Torque, Starting and Running:
WDD01-XXX – 3.0 oz.-in. Typical
WDD02-XXX – 6.0 oz.-in. Typical

Note: Clockwise rotation (facing shaft) gives increasing output. Output can be made “decreasing” by removing sensor cam and reversing it on the shaft.